Enjoy Healthy Air With Bryant Indoor Air Quality Products

Identifying the source of your air quality issues is the first step toward a healthier home. Use this guide to match common symptoms with the right Bryant solution.

Issue/Source	Symptom	Our Solution
Particle allergens Pets, dust mites, mold, pollen, animal dander	Known to trigger and worsen asthma and allergy symptoms	Air Purifier
Chemical Pollutants  Cleaners, paints, adhesives, pesticides, cosmetics and air fresheners	Nausea and headaches. At high levels, can cause eye irritation	Ventilator
Carbon Dioxide  Simple breathing. Burning candles, gas, wood and other combustibles	Drowsiness, poor concentration	Ventilator
Relative Humidity  Too much or not enough moisture in the air	Moist air - mold and dust mites; dry air - nosebleeds, dry eyes and skin	Dehumidifier, Humidifier
Mold and Bacteria on the Cooling Coil  Dampness	Coughing, respiratory issues	UV Lamp

Indoor air circulates through a home’s return air ducts, into the heating/cooling system, then back into the home’s living areas. It is full of tiny particles from both natural and manmade sources such as pollen, dander, mold, tobacco smoke, exhaust and select viruses and bacteria. The largest of these particles settle on interior surfaces and appear as dust. Smaller particles also settle, but become airborne again with the slightest disturbance. Our best defense – the Evolution air purifier and now the Evolution return air purifier – provides you two distinct choices for including this important technology in your home. As part of a strategy for slowing the spread of infectious disease in your home, the Evolution™ Air Purifier should be considered essential.

 

Featuring our patented Captures & Kills® technology, the Evolution air purifier offers proven, third-party tested effectiveness with a 99% inactivation of select captured viruses and germs when used as instructed,¹ including Coronavirus, Common cold surrogate, bacteria that causes strep throat, and human influenza.

Carbon monoxide (CO) is a colorless, odorless gas produced by burning fuels that can cause serious health issues or death. A Bryant Carbon Monoxide Alarm detects dangerous CO levels and alerts you immediately.

 

Our alarms feature sophisticated sensor technology that updates every 15 seconds. For maximum peace of mind, place an alarm on every level of your home and in every bedroom. The continuous digital display allows you to monitor CO levels in real-time, while the test/reset button ensures your electronics are functioning properly.

The Bryant Germicidal UV Lamp uses intense ultraviolet light to kill bacteria and mold that can grow on your system's indoor cooling coil.

 

Your HVAC system works hard in the background, but damp cooling coils can become breeding grounds for mold and fungi. This buildup reduces efficiency and releases unpleasant odors. By mounting a UV lamp near the coil, you enhance system performance and prevent these contaminants from entering your airflow.

The Carbon Air Purifier with UV targets odors, volatile organic compounds (VOCs), and household gases. It combines dual technology to reduce microorganism growth—such as mold and viruses—on the evaporative coil² and prevents them from releasing into recirculated air³. It provides continuous treatment whenever your system runs.

Bryant energy and heat recovery ventilators replace stale indoor air with fresh outdoor air without losing the heating or cooling energy you’ve already paid for.

 

• Heat Recovery Ventilators (HRV): Ideal for colder climates.
• Energy Recovery Ventilators (ERV): Ideal for humid climates, as they remove excess humidity while ventilating.

A Bryant whole-home humidifier adds moisture to dry, heated air during winter. Proper humidity relieves dry skin, static shock, and irritated nasal passages. It also helps you save energy—humidified air feels warmer, allowing you to lower your thermostat without sacrificing comfort.

During summer, high humidity can make your home feel sticky and uncomfortable. A Bryant whole-home dehumidifier works with your AC to pull excess moisture from the air. This protects wood flooring and furnishings from warping and helps control mold growth*. Plus, drier air feels cooler, letting you set your thermostat higher to save on cooling costs.

Connecting with a Bryant dealer for the best indoor air quality (IAQ) products ensures you're getting expert advice, high-quality products, and reliable service tailored to your home’s specific needs. Here are a few reasons why working with a Bryant dealer is the right choice:  

Schedule an appointment with your local Bryant dealer to start the process of getting healthier and cleaner air in your home.

 

* https://www.epa.gov/indoor-air-quality-iaq/inside-story-guide-indoor-air-quality

¹ The Evolution air purifier has demonstrated effectiveness against the murine coronavirus, based on third-party testing (2020) showing a >99% inactivation, which is a virus similar to the human novel coronavirus (SARS-CoV-2) that causes COVID-19. Therefore, the Evolution air purifier can be expected to be effective against SARS-CoV-2 when used in accordance with its directions for use. Third-party testing (2012, 2007) also shows ≥99% inactivation for the type of virus that causes common colds, Streptococcus pyogenes and human influenza. Airborne particles must flow through your HVAC system and be trapped by the MERV 15 Evolution filter to be inactivated at 99%. Learn how it works at Bryant.com/purifier

² The efficacy of the Carbon Air Purifier with UV (UVCAPXXC2015) to remove Aspergillus niger (97%), Penicillium citrinum (>99.99%), Escherichia coli (>99%), Staphylococcus epidermidis (>99.9%), Coronavirus 229E (95%) and MS-2 bacteriophage (>99.99%) from treated surfaces after 24 hours was demonstrated in an ASTM E3135-18 test conducted by a third-party laboratory under ambient temperature and humidity conditions.

³ The efficacy of the Carbon Air Purifier with UV (UVCAPXXC2015) to remove a surrogate airborne pathogen, MS-2 bacteriophage, was demonstrated with a decay rate (k) of 0.162860 and Clean Air Deliver Rate (CADR) of 130.6 cfm in 60 minutes in a chamber test conducted by a third-party laboratory using a 1007 ft3 chamber with an airflow of 1,220 cfm, test temperature of 74-77°F and relative humidity of 45.1-46.6%.